CureM
UV Curing System
Post-curing is requierd in oder to obtain the final material properties. After 3D printing in photopolymer resin-based materials is not yet fully cured.
Post-curing is necessary to reach full monomer conversion for a various purpose.
To maximize
material properties
High Power UV intensity
and irradiance
More faster
Post curing(1-10mins)
Compare to
a existing curing machine and a CureM
“The same material makes different outcome depends on what curing machine you used.”
CureM curing unit’s necessity for 3D printed objects
- To prevent a shrinkage and discoloration / To reach full monomer conversionfor a various purpose
- To obtain the optimum tensile and flexural strength
Feature
- Fast curing time(1-10min) using High capacity UV LED
- Adjusting LEVEL(1-5) of UV LED power for each 3D object’s type
- High curing quality through 3 dimension UV irradiation
- Ensure user safety with the safe cooling system and LED’s temperature
- Optimal wavelengths of 385/395/405nm based on using Polymer resin
- Enhanced intensity of UV LED by attaching low angle Lens on UV LED
- Uniformly cure 3D objects by automatic turntable
- User friendly through 3.5” Touch LCD
- For maintaining the best UV Intensity, Indicate the used time of UV LED
Properties
U201H(Medium size)
U102H(Dental)
Light Source
UV LED
UV LED
Curing Time
1 - 30mins
1 - 30mins
Input Voltage
100-240 V. 50/60Hz
100-240 V. 50/60Hz
Output Voltage
24V, 6.5A
24V, 5.4A
Display
3.5” TFT Touch LCD
3.5” TFT Touch LCD
LED Wavelength
395nm / 405nm
395nm / 405nm
LED Power Output
112W
80W
UV Energy density
Irradiance of UV
80,000mJ/㎠
200mW/㎠
120,000mJ/㎠
400mW/㎠
LED Operation Temp
5 - 35˚C
5 - 35˚C
Curing Chamber(Tunrtable)
180Ø, 200mm(H)
120Ø, 95mm(H)
Outer Dimension
320 × 465 × 467mm(W×D×H)
250 × 386 × 378mm(W×D×H)
Weight
12kg
9kg